Do you have any questions about our products or would you like to contact our Technical Office to repair or custom-manufacture a product? Contact Us!
Central office
+34 932 681 833
fuiberica@fuiberica.com
Contact
×
Do you have any questions about our products or would you like to contact our Technical Office to repair or custom-manufacture a product? Contact Us!
Central office
+34 932 681 833
fuiberica@fuiberica.com
Contact
Gear Motor for Permanent Immersion Pool Covers
FEATURES
– Tubular gearmotors designed for use in permanent immersion.
– ABS housing resistant to the effects of electrolysis and chlorine.
– Easy-to-install adapter rings for any tube diameter (round, square or rectangular flanges to meet any need)
– 24V motor
– Transmitted torques: from 110 mN (PL1210), 180 mN (PL2010), 250 mN (PL3110) or 500 mN (PL6010) at approximately 4 rpm
– Shaft in stainless steel -316L- with customized finish
– Limit switch adjustment by means of a simple switch, permanent memory (no battery required)
– 1.5m power cord
The geared motors work with a 220V • 24V –IP55- power supply box that houses a control card for the geared motor and the limit switch, with an electrolysis management relay.
The boxes are identical to those used in the range of tubular gearmotors of the DL1310, DL3010 and DL6010 series.
| Product | Data sheet | ||
|---|---|---|---|
| Gear Motor for Permanent Immersion Pool Covers |
Download |
Gear Motor for Permanent Immersion Pool Covers, PL1210, PL1218, PL2010, PL3210, PL3218, PL605, PL6010, PL7710, AN1030, AN1040, AN1072, AN10XX UNIMOT120, AN10XX, UNIMOT120, ABRIMOT110, ABRIMOT66, serie EDEL, PL, AN, ANXX, UNIMOT, ABRIMOT, serieedel, edel, serie, AN10XXUNIMOT120, Covers, Pools, Immersions, Permanent
