Do you have any questions about our products or would you like to contact our Technical Office to repair or custom-manufacture a product? Contact Us!
Central office
+34 932 681 833
fuiberica@fuiberica.com
Contact
×
Do you have any questions about our products or would you like to contact our Technical Office to repair or custom-manufacture a product? Contact Us!
Central office
+34 932 681 833
fuiberica@fuiberica.com
Contact
DPR-N Pneumatic Spring Applied Tooth-type Couplings are engaged by the action of thrust springs, which guarantee the nominal torque.
Contrary to the spring released ones, in working conditions DPR-N Pneumatic Spring Applied Tooth-type Couplings are engaged by the action of thrust springs, which guarantee the nominal torque. The disengagement occurs when air under pressure is supplied to the working cylinder through the supply bore «A» located on the external diameter of the working cylinder itself. In order to obtain a complete disengagement of the coupling, you must guarantee the release pressure suggested on this catalogue; we also suggest to mount the command valve, which must be equipped with a blow-off device, as close as possible to the working cylinder, to quickly and precisely engage the transmission.
MOUNTING AND AIR GAP ADJUSTMENT
When mounting, please follow our instructions and examples. The working cylinder must be anchored, but not blocked, by means of a bracket or pin engaged on one of the three 120° milled spots on the working cylinder itself; this bracket is to be hooked onto the most convenient milled spot, in relation to the air supply bore, making sure that the working cylinder has some radial and axial play. During the assembly phase, it is very important to check the air gap (Q) at 3 points at 120° with a thickness gauge; it should be as specified in the relevant tables.
| Product | Data sheet | ||
|---|---|---|---|
 DPR-N Pneumatic Spring Applied Tooth-type Couplings |
Download |
DPR-N Pneumatic Spring Applied Tooth-type Couplings DPR-N, DPR-N 00 , DPR-N 01 , DPR-N 02 , DPR-N 03 , DPR-N 04 , DPR-N 05 , DPR-N 06 , DPR-N 07, 1, 2, 3, 4, 5, 6, 7
