Do you have any questions about our products or would you like to contact our Technical Office to repair or custom-manufacture a product? Contact Us!
Central office
+34 932 681 833
fuiberica@fuiberica.com
Contact
×
Do you have any questions about our products or would you like to contact our Technical Office to repair or custom-manufacture a product? Contact Us!
Central office
+34 932 681 833
fuiberica@fuiberica.com
Contact
MPR/MPG/MP Pneumatic Single-plate Clutches are suitable only for dry operation and therefore the friction surfaces should not come in contact with lubricating materials, thus affecting the transmission torque.
The main feature of these clutches is that the torque is directly proportional to the supply pressure; therefore, the torque will vary increasing or decreasing the pressure. A set of helical springs, to counter the supply pressure, completely disengage the transmission during a total pressure loss, thus avoiding entrainment.
MOUNTING
When mounting, please follow our instructions and examples. The working cylinder must be anchored, but not blocked, by means of a bracket or pin engaged on one of the three 120°milled spots on the working cylinder itself; this bracket is to be hooked onto the most convenient milled spot, in relation to the air supply bore, making sure that the working cylinder has some radial and axial play. During the assembly phase, it is very important to check the air gap (Q) at 3 points a 120° with a thickness gauge; it should be as specified in the relevant tables.
+Info
Pneumatic Single-plate Clutches MPR, MPG, MP, MPR00, MPR01, MPR02, MPR03, MPR04, MPR05, MPR06, MPR07, MPG00, MPG01, MPG02, MPG03, MPG04, MPG05, MPG06, MPG07, MP00, MP01, MP02, MP03, MP04, MP05, MP06, MP07
